SKU: SKU: CLEAR-ETS-EBM-ICP
Earn [points_amount] when you buy this item.
Condition on THIS Clearance Item:New
Clearance Items Purchase Disclaimer:
1. Final Sale Policy: All clearance items are sold as final sale. No returns, refunds, or exchanges are permitted under any circumstances.
2. Processing Time: Allow up to 2 days for processing clearance items. Do not visit the store to pick up a clearance item unless you have placed an order and received confirmation that it is ready for pickup.
3. Shipping Costs: Clearance items do not qualify for free shipping. If you require shipping, you can request a quote before making a purchase or receive a quote after placing your order. Should you find the shipping cost too high after purchase, you may cancel the order with a 15% restocking fee. No exceptions will be made.
4. Buyer's Responsibility: While we have categorized clearance items diligently, it is the buyer's responsibility to ensure the compatibility of the part number with your vehicle. Please research the part number on the manufacturer's website. Raptor Racing will not be held responsible for any incompatibility issues.
5. Warranty Information: There is no warranty on clearance items that are open-box or have scratches and dents. Brand new items have a manufacturer's warranty, but Raptor Racing will not assist with any warranty issues on clearance items.
6. Inventory Updates: In case an item is out of stock after purchase due to inventory discrepancies, an immediate refund will be issued. If an item is marked as "out of stock," it is not available for purchase.
Please ensure you have read and understood these terms before purchasing clearance items.
The ETS intercooler Kit Features
Note how the inlet and outlets are staggered. The inlet is at the top of the cooler and the outlet is at the bottom. This design will force the air to flow through the whole cooler, not just straight across as if both inlet and outlets were on the top.
Also note the radiator shroud tabs at the bottom of the cooler.
Analysis of Stock Intercooler,
Base Test on a stage 1 vehicle at 12psi shows good power, but a flat spot in the mid range power between 5000-5700rpm is likely due to the rapidly rising outlet temps of the inefficient stock intercooler. Based upon the 100deg mid pull temps, and the 125deg end of pull temp, there is definitely room for improvement over the stock intercooler.
Analysis of ETS Intercooler,
Upon installation of the ETS Intercooler Kit, the car shows a 21.05hp increase and makes 361 peak hp. Outlet temps are only 59deg at mid pull and the temps only rise to 66deg at the end of the run. These temps are signifigantly lower than stock, and it is no surprise that there is a substancial power increase with the intercooler kit installed. Aside from the midrange, we also noticed a slight Increase in top end power as well. This can be attributed in part to the ETS Replacement Charge Pipe which replaces the plastic stock pipe with the 2 restrictve dimples that protrude into the flow area of the pipe.
Through Gears Test
As our test car was an automatic, it was a perfect candidate for a pull through all 4 gears.This is the test that really shows the difference in the ETS Kit vs. the stock intercooler as this test will put a lot of heat into the system in 1st and 2nd gears, which should show the stock units shortcomings as it gets to the high load areas of 3rd and 4th gear.
In this test we see both intercoolers start out at 50deg, by the top of second gear the ETS intercooler is only up to 57deg, while the stock unit is already at 78deg. By the time we get to the top of third gear, the stock cooler has heat soaked, and the charge temps are up to 124, which is way too hot to safely control knock. While the stock intercooler is struggling in 3rd gear, the ETS intercooler is handling the temps with ease, yielding a 69deg charge air temperature. As the car shifts into 4th, the stock intercooler continues to struggle to control the charge air temps, and fails miserably, ending up at 158deg, and even causing timing to be pulled enough that we see two noticeable dips in power.
The ETS intercooler on the other hand, is handling the load of 4th gear without issue, and is returning good power throughout the rest of the pull. Charge temps rise to only 91deg, and we see a max power difference of 25hp. This is a considerable improvement over the stock unit, and is a difference you can really feel in the drivers seat.
30sec. After Pull Analasys,
The above graph illustrates the how well the ETS intercooler deals with heat even after the pull. As illustrated, the ETS intercooler just never gets hot, and even 30seconds after a run through all the gears, the ETS unit is only 69deg while the stock cooler is still over 110deg. These low after pull temps are important because it means that with the ETS intercooler System you ready to make another pull, while the stock cooler is best left to cool down for at least a few minutes.
Stage 1 Race Gas
After all of the design testing was completed, we ran the car on unleaded MS109 racegas and turned up the torque table settings. The outcome was 393whp and 414tq. Not bad for a stage 1 automatic car, with just intake, intercooler, and a tune.