Diagram Reference #31
Ford Mustang (2015+) Rear Differential Mount Rear Bushing Insert (Race)
Contents (parts per pack):
1x A Insert 1x B Insert 2x Stainless steel sleeves
2x Small washers 2x Large Washers 2x Bolts 1x Grease
Please read the complete fitting instructions and check package components before fitment. These fitting instructions are to be used as a guide and in conjunction with workshop manual.
How to install your Gen 6 Mustang rear differential mount rear bushing inserts:
1. Support rear subframe and diff. Loosen rear subframe bolts to lower subframe and access the rear diff mounts.
2. Undo the bolt connecting the diff to the subframe.
3. Clean any dirt or debris from around the rubber bush and voidings.
4. Push stainless steel sleeve into the bore of the insert and apply some of the supplied grease to the inner surface of the insert.
5. Fit insert B into bushing with no voids. Use supplied washers and bolts to secure insert on the mounts Fig 1.
6. Fit insert A with prongs into bushing with voids. Use supplied washers and bolts to secure insert on the mounts. Fig 2.
7. Refit the front subframe bolts and tension all hardware to manufacturers recommended torque settings.
